Item no.: 0080002
| Operating voltage | 230 V AC |
| Frequency | 50 Hz |
| Width | 1 modules |
| Installation type | DIN rail |
| Stand-by consumption | ~0 W |
| Capacity loss max. | 0.7 W |
| Glow lamp load | 50 mA |
| Setting range time | 1 – 7 min |
| Type of connection | Screw terminals |
| 3/4-way conductors | Yes |
| Secondary switching | After 30 s |
| Type of contact | NO contact |
| Opening width | > 3 mm |
| Switching output | Not potential-free (230 V) |
| Incandescent/halogen lamp load | 2300 W |
| Fluorescent lamp load (conventional) lead-lag circuit | 2300 VA |
| Fluorescent lamp load (conventional) parallel-corrected | 1300 VA 70 µF |
| Energy saving lamps | 150 W |
| LED lamp < 2 W | 30 W |
| LED lamp 2-8 W | 300 W |
| LED lamp > 8 W | 300 W |
| Fluorescent lamp load (electronic ballast) | 600 W |
| Fluorescent lamp load (conventional) series-corrected | 2300 VA |
| Switching capacity | 6 AX at 230 V AC, cos φ = 0.3, 16 A at 230 V AC, cos φ = 1 |
| Switch for permanent light | ✔️ |
| Switch-off pre-warning | |
| Multi-voltage input | |
| Zero-cross switching | |
| Test approval | VDE |
| Housing and insulation material | High-temperature resistant, self-extinguishing thermoplastic |
| Ambient temperature | -10°C … 50°C |
| Protection class | II |
| Type of protection | IP 20 |
| Tender text | DOC | ELPA-8_0080002-Tender Text (25,6 kB) |
| Operating instructions | ELPA-8_0080002-Operating Instructions (2,1 MB) | |
| CE declaration of conformity | ELPA 8-EU Declaration of Conformity (417,6 kB) | |
| Data sheet | ELPA 8 (636,5 kB) |
